Raw Material Feeding & Batching Machinery
Raw material feeding machines control the flow of clay, shale, coal gangue, fly ash, soil mixture or internal fuel into the production line. Stable feeding helps prevent overload in the crusher, mixer and extruder.
Stable Feeding for Continuous Brick Production
The feeding and batching section is the first control point of a clay brick production line. A suitable feeder keeps raw material volume consistent, reduces sudden load changes and helps the crushing, mixing and extrusion section work smoothly.
Equipment in This Category
The main machinery and items NES can supply or source for this section of the clay brick production line. Final model, capacity and configuration are confirmed after project review.
Selection Points
- Raw material type and moisture level
- Required hourly production capacity
- Crusher and mixer input capacity
- Need for coal or additive batching
- Belt width, hopper volume and motor power
Connected Production Flow
Where this section sits in the clay brick production line:
Reference Specification Table
| Model / Machine | Technical Specification | Motor Power | Typical Capacity | Additional Info |
|---|---|---|---|---|
| GD50×250 Box Feeder | Approx. 500 mm belt width, 2500 mm feeding length | 3–4 kW | 20–40 m³/h | Suitable for small clay preparation lines |
| GD60×300 Box Feeder | Approx. 600 mm belt width, 3000 mm feeding length | 5.5–7.5 kW | 30–60 m³/h | Common for medium clay brick plants |
| GD80×400 Box Feeder | Approx. 800 mm belt width, 4000 mm feeding length | 7.5–11 kW | 50–90 m³/h | For higher capacity automatic lines |
| GD100×500 Box Feeder | Approx. 1000 mm belt width, 5000 mm feeding length | 11–15 kW | 80–120 m³/h | Large plant feeder for continuous production |
| Coal / Additive Feeder | Screw, belt or small hopper type dosing system | 1.5–5.5 kW | Project based | Used for internal fuel, additive or blending control |
Why Source This Machinery From NES
Project-Based Selection
NES recommends machinery by clay type, brick size, daily capacity, kiln technology, dryer system and client budget — not from a one-size catalog.
China Sourcing Support
We work with experienced China-based machinery and kiln partners to give clients suitable equipment, technical drawings, installation guidance and spare parts.
Installation & After-Sales
Layout planning, machinery installation, testing, trial production, operator training and ongoing spare parts support are part of the NES scope.
Need Feeding & Batching Machinery?
Contact NES for feeder model selection, capacity matching, layout support and full clay brick plant machinery quotation.
www.nextesl.net